Metal Buildings in Odessa, TXSteel building contractor for Odessa & Ector County
Shops, warehouses, oilfield buildings and commercial steel buildings in Odessa, West Odessa, Gardendale and across Ector County. One contractor for the dirt work, the slab and the steel.
Steel buildings for Odessa businesses, from dirt to dried-in.
If you’re searching for metal buildings in Odessa, TX, you probably need more than a steel kit. You need the pad built, the slab poured, the frames set and the roof and walls on, without chasing three different crews. That’s the job Gorilla Builders TX does.
We build pre-engineered metal buildings and steel buildings for shops, warehouses, oilfield service buildings, equipment and truck shops and retail shells across Odessa, West Odessa, Gardendale and Ector County. The building, the concrete and the erection are coordinated under one contractor, so everything is built to the same engineered drawings.
Send us your size and location and we’ll put together a free quote for your building.
- Building package ordered to your size, loads and use
- Concrete slab & foundation built to the building’s engineering
- Steel erection by experienced crews
- Metal roof & wall panels to a dried-in shell
- Doors & openings planned into the package
- Dirt work & pad prep before the pour
- Office finish-out inside the building
- Overhead cranes & wash bays built into the shop
Metal buildings for working businesses.
Not sure your project fits? Text us a quick description and we’ll tell you.
Shop Buildings
Clear-span shops sized around your trucks and equipment.
Warehouses
Storage and distribution buildings with large door openings.
Oilfield Buildings
Service shops and yard buildings. See oilfield shop buildings.
Equipment & Truck Shops
Tall eaves and drive-through bays planned in from the start.
Retail & C-Store Shells
Retail buildings and convenience store / gas station shells.
Commercial Canopies
Canopies for retail, fueling and equipment use.
Getting a metal building quote in Odessa is simple.
Send your size
Use the quote form, text us or call. Width, length, what the building is for and where it’s going is plenty to start. Plans or a rough sketch help.
Talk through scope
We go over doors, eave height, the slab and the site so the quote covers the building you actually need.
Get your free quote
A price for your building on your site, not a per-foot guess from a website. No obligation.
Dirt to dried-in
Dirt work, foundation, steel erection, then roof and wall panels to a dried-in shell, coordinated by one contractor.
The concrete slab for your metal building in Odessa.
Most slab problems on a metal building start before the truck shows up: a foundation designed without the building’s engineering, or anchor bolts that don’t match the frames. Because Gorilla Builders TX pours the slab and erects the steel, the two are planned together from day one.
Do you need a slab?
Nearly every commercial metal building sits on a concrete foundation designed for that building. Whether it’s a full floor slab with thickened edges or another foundation type depends on how the building will be used and what the engineering calls for. Shops, warehouses and anything that sees trucks or equipment almost always get a full slab.
How thick should it be?
There’s no single right number. Thickness, reinforcement and footing size come from the engineered drawings and depend on the loads the floor will carry (forklifts, trucks, racking, equipment) and the soil under it. We build to the engineered design, not a rule of thumb.
Anchor bolts & reactions
The metal building manufacturer’s engineering gives the column reactions and the anchor bolt layout. Footings are sized from those reactions, and the bolts are set to the plan so the frames drop right into place at erection.
Plan the extras early
Overhead door openings, trench drains, equipment pads and utility stub-ups are far easier to form before the pour than to saw-cut later. Tell us how the building will be used and we’ll plan them into the slab.
Before you order a steel building.
- City or county? Rules inside Odessa city limits differ from unincorporated Ector County. Know which applies to your site before the building is engineered.
- Size and clear height. Width, length and eave height should fit your equipment, vehicles or racking, with room to grow.
- Doors first. Big overhead doors change the framing design, so decide sizes and locations before ordering.
- Wind and heat. The building has to meet the design loads where it sits, and insulation makes a real difference in a West Texas summer.
- Site access. Delivery trucks, pad elevation and drainage need to be sorted out before the steel shows up.
Metal buildings in Odessa: questions we hear.
Do you build metal buildings in Odessa and West Odessa?
Yes. We build metal buildings and steel buildings in Odessa, West Odessa, Gardendale and across Ector County, as well as Midland and the rest of the Permian Basin. See all service areas.
Can you pour the slab and put up the building?
Yes. The concrete slab and foundation, the steel erection and the roof and wall panels are handled by one contractor, so the anchor bolts and footings are built to the same engineering as the building. Read more about the slab for your metal building.
Do I need a permit for a metal building in Odessa?
It depends on where the site is. Requirements inside Odessa city limits are different from unincorporated Ector County. Tell us the site address when you ask for a quote and we’ll talk through what applies, then confirm with the city or county before you build.
How much does a metal building cost in Odessa?
There’s no set price. Size, eave height, doors, the slab, the site and steel pricing at the time all change the number. Our metal building cost guide explains what drives it. The fastest way to a real number is a free quote for your exact size.
Is a metal building the same as a steel building?
For most people, yes. Both usually mean a pre-engineered metal building (PEMB): steel frames, girts and purlins designed by the manufacturer for your size, loads and use, covered with metal roof and wall panels.
How long does it take to build a metal building?
It depends on the engineering and manufacturing time for the building package, how much site work the lot needs, the size of the slab and the weather. We’ll give you a schedule for your project along with your quote.